The main machine is the heart of the whole production line. We give you a suitable power configuration of the main machine according to the diameter and other dimensions of the products produced and the output requirements.

The vacuum sizing tank is the machine used to reduce the temperature to minimize the chances of deformation while plastic raw material pass-through from the die head of the extrusion machine. Cooling is the necessary part to maintain the desired shape of the extrudate.

Haul off machine, also called puller machine. This kind of machine is used for pulled-out thermoplastic continuously and uniformly. We offer a wide range of belt and crawler haul-off units. Our simple machine operation, and constant speed synchronous drive make them the best solution for extrusions.

Cutter machines also called take-off stations, it is for the precise cutting of extruded products. There are many different types of cutting machines to meet the requirements of different product characteristics and quality.

We have configured this system specifically for the mainframe of our rigid pipe production line.  Before using a gravimetric dosing system, the temperature difference between day and night, changes in the grid voltage, and impurities in the raw materials will cause the extrudates to be heavier or lighter during production. Therefore, The workers need to check whether the finished product is within the set weight range multiple times and then manually adjust the traction speed.